Cevil Engineering :
Civil engineering is a professional
engineering discipline that deals with the design, construction
and maintenance of the physical and naturally built environment,
including works such as bridges, roads, canals, dams and buildings.
Civil engineering is the oldest engineering discipline after military
engineering, and it was defined to distinguish non-military engineering
from military engineering. It is traditionally broken into several
sub-disciplines including environmental engineering, geotechnical
engineering, structural engineering, transportation engineering,
municipal or urban engineering, water resources engineering, materials
engineering, coastal engineering, surveying, and construction
engineering. Civil engineering takes place on all levels: in the
public sector from municipal through to federal levels, and in
the private sector from individual homeowners through to international
is a very versatile civil engineer having experience of
design, research and planning of major multipurpose river
valley projects, construction of buildings, roads, hydraulic
structures, regulators cum bridges, syphens and canals etc.
Also has vast experience of teaching the under graduate
engineering (Civil) students, subjects like engineering
geology, geotechnical engineering ,design of hydraulic structures
and highways, surveying, building materials & construction
and financial management.He also specializes in Geotechnical
Engineering, Geology and has great passion of teaching these
subjects.Knowledge of civil engineering is essential in
the fast developing economy like India as it is the first
step in any project.
B.Sc.(Civil Engg.), LL.B.,ME (Geo Tech.).
K. S. Karki obtained his B.E.(Civil Engg.) from one of the
most prestigious university in Civil Engineering i.e. from
University of Roorkee in 1967.He obtained his Ph.D. from
another prestigious institute i.e. IIT, Delhi.He has guided
many M.Tech. students and presented papers in international
forums and published several research publications.He has
also won award of Institutions of Engineers and is a member
of several professional and learned bodies.He is considered
an authority on water resources engineering.
Dr. K.S. Karki, Professor
B.E. (Civil Engg.) IITR,
M.Tech., Ph.D. (IITD)
Professor : Mr. S.L. JAIN
S.L. Jain Assistant Professor in civil engineering Dept.
has served 33 years in Irrigation department and 3 years
as assistant Professor in civil enggg. Department at MIET
Meerut. Did B. E. with honours from Aligarh Muslim University
Professor : Mr. Shree pal
B.E. (civil) in 1964 from University of Rookee. Retired
from the post of Chief Engineer (U.P. Irrigation Department
) in 2001.He has experience of about 36 years and 7 month
in govt. Service working at different Post from assistant
engineer to Chief Engineer . He has designed many types
of structures like: aqueduct, syphons falls, escape head,
head regulators, cross Regulators, back regulator, pump
house, silt ejector, box type bridges etc.
1. DRAWING LABS – it is well equipped
with 60 nos drawing boards @t.s. etc with well trained drawing
2. SURVEYING AND GEOINFORMATICS LABS –
this labs is havy all ground survey experiments as, plaine table,
prismatic cumpass, dampy level, tilting level, THEODOLITE, ELECTRONIC
THEODOLITE, TOTAL STATION, G.P.S. PARALLAX BAR, MIRROR STEREOSCOPE
ETC. With chains, tapes, ranging rods etc havy good trained survey
3. BUILDING MATERIAL LAB-
it is equipped with well quality equipments (AMIL) having the
facilities for testing on cement, aggregates, concrete, bricks
etc. *and well trained lab assistant
4. FLUID MECHANICS & HYDRAULICS LAB-
this lab is equiped with a variety of flow measuring devices like
VENTURIMETER, NOTCHES, ORIFICE and flow fluid techniques for studying
losses in pipes, study of impact of jets over vanes etc. TILTING
BAD OPEN CHANNEL for studying the different type of flow.
5. STRUCTURAL ANALYSIS LAB-
this lab is equipped with very good equipments for verifying
the actual structural parameters with theoretical relations like
Maxwell’s theorem Behi’s theorem crippling load determination
for different end conditions of column’ deflection in unsymmetrical
bending and horizontal and vertical deflections of trusses and
6. TRANSPORTAION LAB-
this lab is equiped with well quality equipments(AMIL) and trained
lab assistants; having the facilities for testing on road materials
like aggregate crushing, impact, abrasion(loss angle’s),
compressive strength etc. Here the tests on bitumen’s as
–softening point , flash & fire point, ductility and
penetration tests are also performed.
7. GEOTECHNICAL LAB-
it is well equipped with quality equipments(AMIL) and well trained
lab assistants having facilities for various tests on soils both
labs & field as –soil classification, Atterberg’s
limits, determination of dry density, moister content, permeability,
shear perameters and ----both DIRECT SHEAR and TRIAXAIL machines.
Bearing capacity tests both S.P.T. and D.C.P.T.
8. CADD LAB-
This lab is having 40nos. Of computers with various software’s
(civil engineering application) like AUTO CADD, STAAD.PRO. ,M.S.
PROJECT etc. For drawing of plan, sections etc @ for designing
purpose etc. Apart that C.B.S.N.T facility is also available.
9. ENVIORMENTAL ENGGINEERING LAB-
this lab is having the equipments with trained lab assistants
for determining the ph, turbidity, alkalinity, acidity, hardness
B.O.D., C.O.D., KJELDAHL NIT ROGAN, and FLUORIDE etc tools.
10. GEOLOGY LAB-
this lab is having set of minerals and rocks with identification
facilities like cleavage, Mohr’ hardening brc
|Building Material Testing
|Civil Engineering Drawing & Planning
other links:- SYLLABUS FACULTY